IJOY Capo Squonk kit introduction

Contains the IJOY Capo Squonk Mod and COMBO RDA Triangle Atomizer, the IJOY Capo Squonk Kit looks like a cracking little vaping device. It is a regulated squonker kit compatible with 21700/20700/18650 battery. The maximum output power of the kit can reach up to 100W with single 20700 3000mAH battery. The big OLED screen in the front of the mod gives users essential information such as wattage, battery power, resistance puff counter, mode setting and so on. The location of adjustment buttons and big fire button is well designed to make the kit looks hale and fashionable. An innovative triangular gold-plated deck that allows for the hassle-free building is also included in the Ijoy COMBO RDA Triangle. Side airflow directing to the coils makes airflow smooth and gives you the best flavor.

IJOY Capo Squonk kit

IJOY Capo Squonk Kit Parameters:
Size: 78.2mm x 52.3mm x 30mm
Bottle Capacity:9ml
Max Wattage: 100W
Resistance: 0.05ohm – 3.0ohm
Suitable tank: no overhang with 25mm tanks
TC Mode: NI,TI,SS
Thread Type:510 thread
Unique Custom User Mode
USB port charging support
Firmware Upgradeable
25mm diameter
Compatible with
high-rate 21700 battery
high-rate 20700 battery
high-rate 18650 battery with adapter (batteries are not included, you should buy batteries separately)
Color: Black, Gun Metal, SS, Rainbow, Gold, Green

IJOY Capo Squonk Kit Features:
100W Maximum Output
Tiny and ergonomic size
9 ML food-grade soft unique designed silicone bottle
Personalized big fire button
TCR function
Unique Custom User Mode
USB port charging support
Firmware Upgradeable
Ultem drip tip

IJOY Capo Squonk Kit comes with:
1 * IJOY CAPO SQUONK BOX MOD
1 * 18650 Adapter
1 * COMBO RDA Triangle
1 * Squonk bottle
1 * Tool pack (2*screws, Screwdriver, 2*Pre-made coils, 2*Japanese Organic Cotton)
1 * USB Cable
1 * Manual
1 * Warranty Card

IJOY Capo Squonk Kit came in with the win when we have had a shortage of good affordable regulated squonk kit. The kit is available on Urvapin now with a discount. Go and buy one to enjoy!

Related Product:
cheap vape deals
sigelei magic box
GeekVape Athena Squonk Kit
SMOK Majesty kit

Smoant Charon TS 218w TC mod

The Smoant Charon TS 218w, is an excellent, flagship device follow-up to the Charon lineups. The TS stands for ‘touch screen’ and this is classed as one of the most responsive you’re ever likely to use. This TC box mod featuring 218W of maximum output power comes in five colors – Camouflage, Wood, Black, Stainless Steel and rainbow.

Smoant Charon TS 218w measuring 59.5mm by 85mm by 29.3mm is made from Zinc ALLOY and is hefty with two 18650 batteries installed. The batteries are directly chargeable via the side Micro USB port. The best part of the 5V/1A charging port is that it is built with a passthrough vaping system, so you may carry on vaping during the charging process. If you prefer using an external charger, the cells are accessed by removing the effortless magnetic battery cover on the back. This will reveal the battery bay with clearly marked polarities.

Smoant Charon TS 218w TC mod
Features & Spec:
Wattage Range:1W-218W
Temperature Range:200℉-600℉
Minimun Atomizer Resistance:0.05ohm
Supports Ni200 Nickel,Titanium, and Stainless Steel Heating Elements
Temperature Coefficient of Relativity(TCR) Adjustments
Customizable Temperature Control Curves
Superior Zinc Alloy Construction
Three Memory Mode
Versatile Temperature Control Module
Modernized Design Element
Magnetic Battery Door
Touch Screen Functionality
Intuitive Large OLED Display
Oversized Textured Firing Button
Low Resistance Protection
Over-time Protection
Reverse Polarity Protection
Overheating Protection
Micro USB Port
510 Atomizer Connection
Powered by two 18650 Batteries(not included)

Package:
1 * Smoant Charon TS 218w TC Mod
1 * Micro USB Cable
1 * User Manual

With a massive 2.4 inch touch screen the Smoant Charon TS 218w not only possesses outstanding looking, but also easy function. Whoever you are, only if you can use a smart phone, you are able to use it easily, and must be attracted with its excellency. Now such an excellent device is available on Urvapin. Hurry up! Don’t miss it!

Strong Recommend:
electronic cigarette
vaporesso swag kit
Hangsen Genesis
smok priv one kit

WISMEC Reuleaux RX GEN3 kit

TheWISMEC Reuleaux RX GEN3 kit contains the third generation of the popular Reuleaux box mod and the WISMEC GNOME Tank. The Kit version is available now at Urvapin.
Capable of a maximum output of 300 watts, the Gen3 matches the same output of the prior FOUR cell Reuleaux RX300. While the RX300 offered lots of power and a polished look, its sheer size turned many Vapers off. The requirement of that 4th 18650 battery didn’t win over many High Wattage Vapers. With today’s RX GEN3, WISMEC is calling the new mod the smallest triple 18650 mod available. And they are right. In fact, upon unboxing the Reuleaux RX Gen3 the very first impression it makes is how much smaller it is than previous models.
WISMEC Reuleaux RX GEN3 kit
But size isn’t the only improvement to the renovated chassis. The WISMEC RX GEN3 box mod does retain many of the traditional design elements of previous Reuleaux bodies, but there have been significant modernization – new colors, a larger display, and the word “WISMEC” carved into both sides of the mod, tweaks that give the new Reuleaux a level of sophistication-

The body update is matched by a revision with the new 1.3 Inch OLED screen, which offers a larger display that provides more information in an organized, easy to understand layout. This new display and its layout means an easier menu operation by the vapers.

The WISMEC RX GEN3 box mod reverts to the triple 18650 battery bank, however, instead of removing the entire back magnetic battery panel door, the Gen3 is opened by a hinged battery door under the body for quick access and a simple drop-in technique. No more fiddling with getting the batteries properly installed.

With Wismec’s much-lauded chipset, the RX GEN3 not only fires up to a that huge 300-watt level, but also includes an all-inclusive temperature control system with native support for Ni200 Pure Nickel, Titanium, and Stainless Steel heating elements.

While in temperature control mode, The Reuleaux RX Gen3 allows for adjustable TCR that for extended compatibility and fine tuning of the users vape experience. The chipset is upgradeable through firmware upgrades with the included USB port/cable.

The WISMEC Reuleaux RX GEN3 kit contains the new GNOME Sub-Ohm Tank. The new GNOME Sub-Ohm Tank offers retractable sliding top-fill system and a stealth dual bottom airflow control. And where would WISMEC be without a new round of coils. In this case, the new GNOME tank uses the WM Coil Series. The WM Coil Series has a flagship coil that is a 0.2ohm WM03 Triple Head, with a wattage range of 40 to 130W, along with a 0.15ohm WM02 Dual Head rated for 30 to 70W. We have ordered additional replacement coils for the review period so we can take the GNOME through some harsh vaping periods.

This is a handsome kit, and the size is going to be a major selling point. Vapers who want to get WISMEC Reuleaux RX GEN3 kit can order it on Urvapin with nice price and service.

Related Recommend:
buy electronic cigarette online
CoilArt DPRO RDA Tank
Coil Master DIY Kit V3
Ijoy captain pd270

Sigelei MT 220W mod

Sigelei MT 220W Mod contains the most fashionable elements of the electronic cigarette industry. It uses a symmetric design and center mounted 510 platform like the Sigelei Snow Wolf Vfeng 230W. It has 4 color options for the mod frame, each of which have contrasting colors with the two battery tubes which are SS304. Black/SS, Dark Red/Gold, Purple/Red, Black/Blue are the 4 color options known. The fire button is shaped like the transformer logo with 2 LED “eyes”, which makes it very eye-catching.

sigelei mt 220w box mod

The control panel is see-thru which makes Sigelei MT 220W Mod look that much more out-of-this-world. Seriously, it looks like a death ray will shoot out of this thing! The chip itself is visible through the front and has flashing LED lights as well that change colors. I’m not sure how programmable any of the LEDs will be, but based on the Kaos and the Vfeng, it’s probably safe to assume you will have a few color options.

Besides the design of the mod, function wise it appears to have the typical Sigelei options and specs as the Spectrum and the Vfeng. Presets for temp-sensing wires, TCR, power modes, etc. But the MT has an advertised ten fewer watts capability, yet it can accept loads down to 0.05-ohms where the others only can handle down to 0.1-ohm. The 510 is centered and based on the specs of 33.5 mm wide, it will handle 30 mm atomizers. Sigelei MT 220W is easy to be operated and has the super heat dissipation function. All these features contribute a lot to your awesome daily vaping experience.

Sigelei MT 220W Box Mod and Sigelei MT 220W kit with revolvr tank are now available at Urvapin with best price. If you are interested, please go on Urvapin to preorder.

Related Product:

electronic cigarette
wismec rx gen3
justfog p16a
SMOK Stick X8 Kit

iJoy captain pd270 kit with Captain S Subohm tank

iJoy Captain PD270 kit is a dual-battery device that comes packed with the most advanced features available today, but what really makes it difficult from other advanced devices is the fact that it supports 20700 batteries, as well as standard 18650 batteries. The new 20700 batteries are supposed to boost battery life significantly, and they may soon become the new standard in the vaping industry.

ijoy captain pd270 234w kit
The iJoy Captain PD270 kit comes in a black-and-white cardboard box, with an image of the mod on the front, and a short description of the device, a list of features and the kit contents, on the back. Interestingly, in their description of the Captain, Ijoy specifically states that they believe that 20700 batteries will replace 18650s and are the future in vaping. Time will tell, but a higher battery capacity definitely sounds great.

The iJoy Captain PD270 kit comes in no less than 54 different color combinations, which is just insane, considering most companies only offer a handful of color options. I particularly liked the carbon-fiber stickers that cover most of the body, but the glossy side panels are a nice touch as well. Not only does it look realistic, but it also has a very realistic texture.

Another interesting feature of the iJoy Captain PD270 kit is the large square-shaped fire button. It takes up the entire upper half of one side of the mod, so it’s like a mini fire bar that you can activate with just your index finger, by squeezing the mod. I thought that it would take some getting used to at first, but it’s actually really easy to work with. The “+” and “-” buttons are located on another side of the device, right under the OLED display. They also work very well, and have absolutely no rattle. Under these two smaller buttons, we have the micro-USB port, which can be used for both charging and firmware upgrades.

The OLED display is about the size of that of the SMOK Alien. With plenty of information being displayed at all times, the icons are large enough to see without straining your eyes, and the brightness can be adjusted via the menu.
The battery door is on the bottom of the mod. You just slide it outwards and push it up to open, slide in the batteries and then slide it back in and it locks. It’s very simple and effective. It’s worth mentioning that if you want to use your 18650 batteries as backup for the Captain, you can, with the help of the silicone adapter included in the kit. Just insert the batteries into the adapter (paying attention to polarity) and just pop into the battery compartment, as you would the two 20700s.
But the thing I like most about this mod is the 510 connection, particularly its positioning. Instead of placing it near the edge of the mod, like most other companies like to do, they’ve moved it toward the center, which allows you to attach any atomizer up to 30 mm in diameter without the least bit of overhang.

IJOY Captain PD270 KIT comes with a Captain S subohm tank, which features a specially designed groove located below the juice reservoir and right above the coil placement. This result in a reduction in heat transmission route and helps prevent the entire structure from heating up during extended use. And a new thread-less coil system for east coil replacement. The Captain S Subohm Tank is conveniently filled via the flip top cap. Bring you the smoothest airflow and the best flavor!

All in all, the iJoy Captain PD270 kit is a very solid mod, in terms of design, build quality and customization options. If you have interests you can preorder it on Urvapin now!

Related Product:

cheap vape deals
smok t priv
wismec rx gen3
aspire breeze

Eleaf iStick Pico 25 with ELLO Launching

Eleaf is so glad to introduce you an upgraded version of the popular iStick Pico, the iStick Pico 25.

The iStick Pico 25 adopts a big 0.91-inch screen, which offers the users a concise and clear interface, 2A quick charge capability and upgradeable firmware with preheat function in a compact, stylish yet powerful package. Powered by single 18650 battery, the iStick Pico 25 is able to output a maximum power of 85W and can handle various tanks up to 25mm diameter. The ELLO atomizer that features the HW coil for ultimate flavor and retractable top for easy filling pairs with the iStick Pico 25 perfectly in terms of both appearance and performance.

Eleaf iStick Pico 25 use new interface for VW mode displays resistance of coil, wattage setting and battery bar more clearly, allowing you to have a check easily by a simple glance.

The Smart mode will save one output power setting for each resistance value and can totally save ten groups of such profiles. Once you change the output power setting for a resistance, it will re-save the changed setting automatically. When the Smart mode has already remembered ten profiles and you want to add another new resistance, the first saved profile will be deleted.

You can download or make logos to your preference and put the favorite one in the mod. The logo should be single color picture in the format of bmp with limited 96*16 pixel.

Steps on how to put logo in the mod:
a.Open the picture you chose with Paint, edit it to be a single color picture of 96*16 pixel, and save it in format of bmp.
b.Download the file on our website, plug the mod in with USB cable, and double click the EleafUpdate.exe.
c.Click “LOGO” and open the picture you saved, finally the custom logo is successfully put in the mod.
d.Press the fire button twice in quick succession when the mod is powered on to enter logo on/off interface and press up or down button one time to turn on or off logo.
e.When you turn on logo and the mod enters standby mode, the logo appears on the screen till the mod goes to sleep mode.

Strong Recommend:

buy electronic cigarette online
ijoy captain pd270
aspire zelos
azeroth rta