WISMEC Reuleaux RX GEN3 kit

TheWISMEC Reuleaux RX GEN3 kit contains the third generation of the popular Reuleaux box mod and the WISMEC GNOME Tank. The Kit version is available now at Urvapin.
Capable of a maximum output of 300 watts, the Gen3 matches the same output of the prior FOUR cell Reuleaux RX300. While the RX300 offered lots of power and a polished look, its sheer size turned many Vapers off. The requirement of that 4th 18650 battery didn’t win over many High Wattage Vapers. With today’s RX GEN3, WISMEC is calling the new mod the smallest triple 18650 mod available. And they are right. In fact, upon unboxing the Reuleaux RX Gen3 the very first impression it makes is how much smaller it is than previous models.
WISMEC Reuleaux RX GEN3 kit
But size isn’t the only improvement to the renovated chassis. The WISMEC RX GEN3 box mod does retain many of the traditional design elements of previous Reuleaux bodies, but there have been significant modernization – new colors, a larger display, and the word “WISMEC” carved into both sides of the mod, tweaks that give the new Reuleaux a level of sophistication-

The body update is matched by a revision with the new 1.3 Inch OLED screen, which offers a larger display that provides more information in an organized, easy to understand layout. This new display and its layout means an easier menu operation by the vapers.

The WISMEC RX GEN3 box mod reverts to the triple 18650 battery bank, however, instead of removing the entire back magnetic battery panel door, the Gen3 is opened by a hinged battery door under the body for quick access and a simple drop-in technique. No more fiddling with getting the batteries properly installed.

With Wismec’s much-lauded chipset, the RX GEN3 not only fires up to a that huge 300-watt level, but also includes an all-inclusive temperature control system with native support for Ni200 Pure Nickel, Titanium, and Stainless Steel heating elements.

While in temperature control mode, The Reuleaux RX Gen3 allows for adjustable TCR that for extended compatibility and fine tuning of the users vape experience. The chipset is upgradeable through firmware upgrades with the included USB port/cable.

The WISMEC Reuleaux RX GEN3 kit contains the new GNOME Sub-Ohm Tank. The new GNOME Sub-Ohm Tank offers retractable sliding top-fill system and a stealth dual bottom airflow control. And where would WISMEC be without a new round of coils. In this case, the new GNOME tank uses the WM Coil Series. The WM Coil Series has a flagship coil that is a 0.2ohm WM03 Triple Head, with a wattage range of 40 to 130W, along with a 0.15ohm WM02 Dual Head rated for 30 to 70W. We have ordered additional replacement coils for the review period so we can take the GNOME through some harsh vaping periods.

This is a handsome kit, and the size is going to be a major selling point. Vapers who want to get WISMEC Reuleaux RX GEN3 kit can order it on Urvapin with nice price and service.

Related Recommend:
buy electronic cigarette online
CoilArt DPRO RDA Tank
Coil Master DIY Kit V3
Ijoy captain pd270

Eleaf iStick Pico 25 with ELLO Launching

Eleaf is so glad to introduce you an upgraded version of the popular iStick Pico, the iStick Pico 25.

The iStick Pico 25 adopts a big 0.91-inch screen, which offers the users a concise and clear interface, 2A quick charge capability and upgradeable firmware with preheat function in a compact, stylish yet powerful package. Powered by single 18650 battery, the iStick Pico 25 is able to output a maximum power of 85W and can handle various tanks up to 25mm diameter. The ELLO atomizer that features the HW coil for ultimate flavor and retractable top for easy filling pairs with the iStick Pico 25 perfectly in terms of both appearance and performance.

Eleaf iStick Pico 25 use new interface for VW mode displays resistance of coil, wattage setting and battery bar more clearly, allowing you to have a check easily by a simple glance.

The Smart mode will save one output power setting for each resistance value and can totally save ten groups of such profiles. Once you change the output power setting for a resistance, it will re-save the changed setting automatically. When the Smart mode has already remembered ten profiles and you want to add another new resistance, the first saved profile will be deleted.

You can download or make logos to your preference and put the favorite one in the mod. The logo should be single color picture in the format of bmp with limited 96*16 pixel.

Steps on how to put logo in the mod:
a.Open the picture you chose with Paint, edit it to be a single color picture of 96*16 pixel, and save it in format of bmp.
b.Download the file on our website, plug the mod in with USB cable, and double click the EleafUpdate.exe.
c.Click “LOGO” and open the picture you saved, finally the custom logo is successfully put in the mod.
d.Press the fire button twice in quick succession when the mod is powered on to enter logo on/off interface and press up or down button one time to turn on or off logo.
e.When you turn on logo and the mod enters standby mode, the logo appears on the screen till the mod goes to sleep mode.

Strong Recommend:

buy electronic cigarette online
ijoy captain pd270
aspire zelos
azeroth rta