Review of Smok Stick V8 Kit—Simple for the Lazy!

Hi our vaping friends! I’m really excited to share this Smok Stick V8 Starter Kit with you.

On its structure, it is very different to those kits built by box mods. Its round and long body makes it very nice in hand and very easy for carrying. You can drop it in your pocket just like a pen. It is in no way too heavy and thus serves for your vaping at any place and any time.

The tank is the famous TFV8 big baby and has a capacity of 5ml, which is compact but maybe not enough for some really heavy vapers. However, its top rotary refilling system can make up this weakness.  To refill the tank, you just need to hold the tank with one hand, and use another one to screw off its drip tip and top cap. Later in the paragraph below, I will give the instructions in details.

The mod of Smok Stick V8 has a capacity of 3000mah, which is a super high capacity. On the mod, there is only one button in total, but one button for all. You click 5 times continually to turn it on and 5 times continually to turn it off, which is really easy for using and also of security. There are multiple protections, such as: 8 seconds protection, low resistance protection, short circuit protection and low voltage protection.  The battery life indicator will blink 4 times each time you take a puff. When it blinks fast with 15 times, it indicates that the voltage is lower than 3.3V, then you need to charge it.

Here I’m gonna to give some instructions for using. From the package, you will see the Smok producer is very considerate.  Details including package list and brief introduction are on the surface of the package box. When you open the box, there is a Stick V8 battery, a TFV8 big baby tank, and a spare V8 Baby M2 0.3ohm dual core, a USB cable and a manual.


Beginning to use it, you screw off the bottom base to drip the coil wick, and wait for 5 to 10 minutes to let it sip.  Then you put the tank on the mod and push open the top cap to fill it through the side filling hole. Click 5 times continually to turn it on and vape on. With its powerful 3000mah battery and big juice tank, this Smok Stick V8 Kit produces really huge vapor.


Easy for operating, and easy for refilling, easy for carrying. This Smok Stick V8 mod together with TFV8 Big baby Tank will really amaze you! Any interests with this Smok Stick V8 Kit? Urvapin delivers you the super cheap vaping devices with finest quality.

Friends, have a careful look on, you will find there are business programs of Drop Ship and Affiliate, besides with Wholesale Price.

If you have requirement on those, pls feel free to contact [email protected]


5 tips from an Ecig player to all those new to mech mods.

Firstly, the new player should avoid using the mech mods with no protective chip.  He or she can have a try after having a full knowledge of how to make atomizer chip, basic electronics Information, security and protection knowledge.

Secondly,  the finished atomizer and the atomizer of no protruding electrode must not match with the mech mods.

Thirdly, when using the mech mod, the battery (unusable if the skin is broken or out of shape), atomizer (if the screw of the electrode is fastened, if the coil position is short-circuit ) and the mech mod (if there is any stain of liquid or connection of contact)

Fourthly, use the battery of standard brands. Don’t buy batteries indiscriminately. Calculating according to ohm law to decide how many batteries should be used.  If the positive electrode or negative electrode is of broken skin, don’t use it. The battery used for box mod may not drive the mech mod. PVC can get peeled easily. Peeling can also be dangerous.

Fifthly, don’t use replicas mod of poor quality.  Some models of the replicas mods have problems, resulting that the bottom cannot bounce back. Moreover, the bottom of the atomizer should not be of oil.  When there are problems caused by taking petty profits, such as abnormal heating when using, or no vapor when igniting, the user should dissemble the battery to check. If it’s too late, the user should throw it to a place where is no people around and warn people to keep away from it.

Super Deal Link:

Classic shots—Usage Experience of Wotofo Lush Plus RDA


Wotofo Lush Plus RDA is an old product of 22mm diameter, produced by the brand of Wotofo. Owing to the multiple color matchings and excellent mouth feel, it is referred as one of the classic RDAs of Wotofo. As the 24mm diametered RDA goes rampant, Wotofo released the subsequent version LUSH RDA, the Lush Plus RDA. Here I’m going to share with you the usage experience of this LUSH PLUS RDA.


The package applies the classic drawer-styled paper box of Wotofo, but if the inner material is the retail version, several details could be improved.

  1. There are only two spare cross screw-drivers. If there could be four in the package, it would be more user friendly. After all, the wear and tear of cross screw is very heavy.
  2. The quality of the spare cross screw-drivers is not so good, and the “cross”is not very big, which will results quick wear and tear of the cross screw.
  3. There are three Claptoncoils in the package. If there are two or four, it would be more considerable for those OCD patient users. Apparently, LUSH PLUS RDA is not fit for single coil build.


Let’s get to the point. These little weaknesses has little influence on the using of this RDA.

Compared with the previous products, the appearance of Lush Plus is very simple and natural. The slight “slim”arc makes this RDA not that monotonous. The connector of the drip tip is between the standard size of 510 and 810 and it can totally satisfy deep lung-hit vaping. As    regard to the diameter of the drip tip, as long as you control the measure of dripping when dripping, you can totally adopts the lazy way to do dripping. According to the actual usage experience, even when the inner wall of the drip tip is full of condensate liquid, this drip tip, made of the material of POM, has never made you inhale the condensate liquid.


The atomizer can be dissembled into 3 parts, the simple structure can give the user an usage experience of convenient and reliable operation.

When using this RDA tank, you will feel that it gives you a lot of pressure. The metal tube wall is very thick, and the coil space beside the two electrodes is narrower than the ordinary 24 MM RDA, making the atomizing space of the two coils of LUSH PLUS RDA more compressed and making the H-shaped two posts and four holes of ordinary drawing resistance more tight.



There is a ladder-styled structure in the tube and a “limit” slot at the bottom. The three domes under the drip tip is good for reflux condensation, besides, they are also of other more practical meaning: First, it compresses the height of the tube, making this 24 MM RDA highly compressed and improving the effect of vapor compression. Second, the metal of the top part is very thick. Even after continuous vaping, you will not feel the heating of the top of the atomizer.


The protruding length of the gold-plated electrode makes it can use the mechanical devices safely. Apparently, the electrode plate is the most concerned detail to the ecig players. The electrode with two posts and four holes presents a shape of ladder. The setting of the positive and negative electrodes are good for the convenient operation of the coil locking, especially when using the comparatively wide coil. If there is no spare screws for locking the coil, please make sure that the cross screwdriver matches the screws of the atomizer, avoiding the wasting of screws, because there are only two pieces of spare screws.

The setting of bottom inflow is very obvious. This kind of inflow is similar to and also different from Kennedy RDA. The Lush Plus applies the “L”styled electrodes and cannot modulate the intake air.  But if the usage data doesn’t go off the setting requirement of the atomizer too much, its drawing resistance will not be empty. In the oil slot at the bottom, the designer designs hollow slots for placing the cotton. In some degree, it is much better for the oil to move up forward the cotton when dripping. Although the tank is not very big, to a RDA that is not designed for extremely huge vapor, it is big enough for using.


The original coil in using shows a very high matching degree, owing to its design of intake size. The draw resistance of Lush Plus is very natural and you will not feel empty. Regarding to the compression of the vapor, it is much closer to the RDA product of 22MM, and it has a very excellent reducing ability of the flavor of the oil. When using the traditional A1 heating coil, LUSH PLUS RDA is more suitable for the 22G coil to roll 5 to 6 circles in 3.0 coil diameter.

The most important point in using RDA is pushing and pulling of the tube lid in daily dripping. An RDA with excellent size should be of moderate tightness for plugging in and pulling out the tube lid. LUSH PLUS RDA is such a type of product. What is called “moderate”? Under condition that the seal ring is completely dry, when you plugging in the tube lid, the lid will not drop of the tube easily and when you pull out the tube lid, you can feel obvious resistance but can still pull it out easily.

If there is the need to mention the problem of this RDA, it will be the cross screw. When using the coil, there is nearly no locking problem. But when locking a 22G A1 coil, since the length of the screw is too short, you will need to screw the screw completely tight(close to the top of the electrode) . If the cross screw is changed to hex screw (the hex screw doesn’t have the cap of the cross screw), or lengthens the existing screw to much longer, it will support the A1 coil much better.


Lush Plus RDA is a mouth-feel oriented RDA with the diameter of 22MM. The excellent workmanship is in no way for finding its faults.  Under the setting of uncontrollable intake air, the draw resistance it presents is worthy of “comfortable”. Obviously, it is the “moderate degree”owing to repeating modification of the intake air. As regard to the reducing ability of the oil flavor, although it can not be said as “strong flavor”, the Lush Plus RDA is absolutely a dripping product with very good taste. Summarizing all these usage experience, this RDA atomizer is excellent enough for players to love it.

Review of Coilart Tricker—Good Look & Competitive Price

Coilart Tricker 

Mechanical devices are always the focus of experienced players.  They are well liked and paid close attention owing to their unique build, fast explosion and special fire supply mode. However, they also make the new players struggle a lot because of their pretty but dangerous feature and their expensive price.

Today we are going to talk about such a mech device with high performance cost ratio. It is the Triker resin mech kit released by Coilart with 30-year experience on Atomizer. (Warm hint: it is an affordable mech kit.)


Coil Tricker

This time, Coilart released two mech kits, the resin styled one and black metal styled one. The resin styled mech kits come in multiple color matching.  What I have is the red resin one.

The Tricker is packed in a triangle box. There is an anti-fake lable at the back of the package. The printing of the package is very delicate with little information. When you open the package, you will find the kit is wrapped in sponge.

The detailed package list include 1 piece of Tricker resin mech kit, a piece of Mage RDA atomizer, a pack of accessories (3 pieces of rings, 2 pieces of magnets, four pieces of spare screws, a piece of loop), a piece of screwdriver, a piece of warning card and a piece of instruction cars. The whole body of the device adopts paint treatment with good abrasive resistance.


Coil Tricker

For the safety of new players, I will show you the content on the warning card: Mech device is prepared for the players with bountiful experience who knows the battery safety knowledge completely with no danger to operate them.

Before you connect the atomizer to the mod, please install it to the Ohm test instrument or voltage regulator to test if it is short-circuit.

Coil Tricker

Let’s take a look at the core device of this kit—the resin mech mod. The body is made of brass. There are resin casings both in the middle and at the bottom. And there is also resin paster at the switch at the bottom.

Every part of the resin material is separated by the brass tubes, full of colorful rhythm. The decorative color of the resin is very gorgeous with bountiful changes. Under different illumination angles, it will reflects ever changing shining luster (completely motivate the coquettish side of me. )

Coil Tricker


When you dissemble the mod to see the structure, it is roughly composed by three parts, the top electrode ring, the tube body and the switch.

When it comes to the electrode ring, many vaping friends said that the atomizer cannot be installed to the bottom. There is a gap between the atomizer and electrode ring. It is similar to the design of the AV mod. If you have ever used the AV mod, you will know the right way to use it.

Those vaping friends, who have not used the AV mod before, please pay attention here. The operation way is like this: install the atomizer to the electrode ring tightly and then screw in the mod. (Such design is for solving the battery length tolerance and the uneven length of the 510 connection)

Inside of the electrode ring ,there is a ladder structure to prevent the positive electrode of the battery from touching the electrode ring thus causing short-circuit, and to improve the security.

Coil Tricker
Coil Tricker